How to Pick the Best Electric Bike Helmet for You?

How to Pick the Best Electric Bike Helmet for You?

In recent years, e-bikes have grown in popularity as an environmentally responsible method of transportation and a way to enjoy outdoor activities. Riders must always wear helmets to prevent brain injuries in the event of an accident, just like on regular bicycles. Yet, with the multitude of options on the market, picking the best electric bike helmet can be a difficult challenge. In this post, we'll look at the many types of bicycle helmets, how to choose a protective material for your helmet, and the key characteristics to look for in an electric bike helmet. To make sure that you are constantly protected when riding your e-bike, we will also go over when to change your helmet.

Main Bicycle Helmet Types

Electric bike helmets come in a variety of styles. Yet, the model designs are typically where the greatest variations occur. Hence, there is little distinction between a helmet for a man and a woman. Yet, the three most common types of helmets on the market are listed below.

  • A visored electric bike helmet: When cycling in extremely hot or cold weather, this provides additional protection. When riding at a fast pace, the visors also shield the eyes from dust and debris.
  • Folding helmets: Folded helmets are lightweight and convenient to carry. You should also take into account a foldable form that would be difficult to compact.
  • Bicycle helmets with lights: These helmets are ideal for nighttime riding. It both aids in your ability to see approaching riders and lets them see you from a distance. This brand-new technology is widely used in many contemporary electric bicycles.

How to Adjust a Bike Helmet?

It's critical to properly adjust a bike helmet for both comfort and safety. The steps are as follows:

  1. Size: First, make sure the helmet is the right size for you. The helmet should cover the top of your forehead and rest flat against your head. On your head, it shouldn't sway or move around.
  2. Straps: Set the straps so that your ears are covered by a V-shaped pattern. The straps must fit snugly without being overly tight. One finger ought to fit between the strap and your chin.
  3. Buckle: Tighten the buckle and position it so that it is in the middle under your chin.
  4. Tightness: Use the dial or knob on the back of the helmet to change the tightness of the helmet. It can be turned in either a clockwise or counterclockwise direction. Although the helmet should fit snugly, it shouldn't be uncomfortable.
  5. Test: Move your head around to check the fit. The helmet must not budge or move while being worn.

Keep in mind to adjust your helmet each time you use it, and to replace it if it has been in a crash or sustains any sort of damage.

Choice of Helmet Protection Material!

Safety is the most crucial factor when it comes to bike helmets. If you are in an accident, wearing a helmet could make the difference between a minor injury and one that alters your life. The material chosen to protect a helmet is one important aspect that greatly influences its safety.

The materials that make up helmet protection come in a variety of sorts, each with pros and cons of their own. Expanded Polystyrene is the most typical material utilized in bicycle helmets (EPS). Lightweight EPS foam can deform upon impact to absorb impact. It is reasonably priced and capable of successfully absorbing one impact. Unfortunately, it needs to be changed after a collision because it is not impact-resistant.

Multi-directional Impact Protection System is a different material that is becoming more popular for bike helmets (MIPS). By allowing the helmet to rotate a little bit upon impact, this layer of low-friction material lessens rotational forces on the brain. It is a popular option among bikers because it effectively lowers the danger of brain damage.

Another material used for helmet protection that is gaining popularity is korod. Its honeycomb-like design offers great impact protection and ventilation. Cycling enthusiasts can choose this sturdy material because it is lightweight and can withstand repeated impacts.

High-end helmets can also be made of carbon fiber. Because of its strength and light weight, it can flex and disperse force across a wider area to absorb impact. Despite being expensive, it is frequently found in professional racing helmets.

The degree of protection you require, as well as the price and weight of the helmet, should all be taken into account when selecting one. Consider purchasing helmets that adhere to safety regulations established by bodies like the Consumer Product Safety Commission (CPSC) or the European Committee for Standardization (CE).

Select E-Bike Helmet Features!

When choosing a helmet for an e-bike, some elements that set it apart from a typical bike helmet must be taken into account. Consider these significant e-bike helmet features:

  1. Certification for safety: The helmet must adhere to regulations imposed by bodies like the Consumer Product Safety Commission (CPSC) or the European Committee for Standardization (CE). These accreditations guarantee that the helmet has completed the required safety inspections.
  2. Full Face Protection: Because an e-bike can travel at speeds greater than those of a traditional bicycle, wearing a full-coverage helmet is necessary to safeguard your face and head in the event of an accident.
  3. Ventilation: As e-bikes are typically heavier than conventional bikes, having a helmet with good ventilation is essential to preventing overheating and discomfort on lengthy rides.
  4. E-bikes can create more force from impacts than conventional bikes do because of their greater speeds, so the helmet should feature an impact-absorbing layer made of EPS foam or Koroyd.
  5. Sun Visor: While traveling at high speeds and exposed to the sun, rain, and debris, a visor can offer additional protection. Moreover, it helps increase visibility and lessen glare.
  6. Install Compatibility: Especially for lengthy journeys, the helmet should fit snugly and be comfortable to wear. Look for features like chin straps that are comfy and have adjustable straps and detachable padding.
  7. E-bikes are frequently used for commuting or nighttime riding, therefore reflective components on the helmet can increase visibility and safety.
  8. Bluetooth Connectivity: Some electric bike helmets have Bluetooth connectivity, which enables you to take calls, listen to music, and get instructions while you're riding.

In general, safety, comfort, and convenience characteristics must be taken into account while choosing an e-bike helmet. To ensure a secure and enjoyable ride, make sure to select a helmet that fits your unique requirements and tastes.

When Do You Need To Replace Your Helmet?

It is crucial to always cycle while wearing a helmet that fits properly. In the event of a crash, a good helmet might mean the difference between a minor injury and a life-threatening one. Helmets do, however, have an expiration date, just like any other piece of safety gear. To ensure that you are fully protected when riding, you must be aware of when to change your helmet.

Every five to ten years, the US Consumer Product Safety Commission (CPSC) advises updating a bicycle helmet. The Snell Memorial Foundation suggests five years, although some manufactures advise changing your helmet after just three. Do helmets really degrade with time, then? They do, but not how you may anticipate.

The only unchanging rule regarding helmets is that if you crash while wearing one, replace it regardless of wear. Helmets for cyclists are one-time use safety equipment. The plastic shell of the helmet's inside foam cannot shield you after compression. Regardless of how old your helmet is or whether you just bought it yesterday, this is true.

It's crucial to remember that your helmet cannot function properly if the foam sustains any physical damage. Hence, you should routinely check your helmet for damage or hairline cracks and replace it as needed.

Helmet EPS foam barely deteriorates at all.

The longevity of this material on Earth can only be calculated in geologic time; it is the same type of expanded polystyrene that is used to manufacture foam cups and cooler insulation. In fact, according to Bruce Swart of the Bicycle Helmet Safety Institute, "The regulations do not permit manufacturers to design a helmet that degrades from perspiration, and the EPS, EPP, or EPU foam is amazingly unaffected by seawater." Hence, helmet foam doesn't degrade over time; age is irrelevant if the foam hasn't suffered any physical harm.

Therefore, it is important that the outer layer preserve the foam's structural integrity. The shell may crack, fracture, or fail in another way in the event of a severe impact if it becomes brittle as a result of repeated exposure to UV light. UV inhibitors are added to the plastic by the manufacturer, but if the color of the shell of your helmet has faded, it's likely been exposed to too much sun. It is therefore more likely to crack under a strong impact.

Chin straps may also become worn out as a result of sweat, salt, and general dirt accumulation. The retention strength test, which involves repeatedly attempting to knock a helmet off a head, is one of the tests the CPSC conducts when approving helmets for sale. The helmet is essentially useless if the slide adjusters are broken or if the chin strap is very tenuously fastened because a blade of the buckle has broken off.

Likewise, throw away the helmet if the retention mechanism is worn out—for example, if the dial no longer ratchets, the foam inserts have lost their loft, or if you discover any other problems that make it difficult for you to keep the helmet from shifting around on your head. Only a helmet that fits properly and stays in place will function properly.

A helmet that is only seldom worn may, in fact, last for many years. But, if you ride frequently, it seems wise to replace your helmet every few years as it might acquire damage along the road that you can't see (or don't recall). In conclusion, make sure to replace your helmet following a collision or whenever it begins to show indications of wear or damage. Don't jeopardize your on-the-road safety.


In conclusion, selecting the best electric bike helmet necessitates taking into account a number of variables, including the style of helmet, the material used for protection, and any additional features, such a sun visor, ventilation, or full face protection. To offer the required protection, it is crucial to make sure the helmet is adjustable and has a good fit. Also, it's important to verify compatibility with e-bike systems. It's also critical to frequently check your helmet for damage and to change it right away if you crash. Last but not least, it is strongly advised to follow the manufacturer's and safety testing organization's recommendations for replacing your helmet to make sure it offers the best protection. You may choose an electric bike helmet that will keep you safe on the road or trail with confidence if you keep these considerations in mind.

Leave a comment

Please note, comments must be approved before they are published

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.